Bondtech Presents Slice Engineering's Mosquito Magnum Hotend
5 (753) · € 17.50 · En Stock
Slice Engineering's Mosquito Magnum hotend has more melting power, superior heat break performance, high structural rigidity, and wide temperature operating range.
Latest added Features
New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs
New heat sink with wider opening for the filament path to more readily accept multi-material setups like the Prusa MMU or Mosaic Palette.
Extended Set Now Including
Boron Nitride thermal paste;
Mosquito Boot;
GammaMaster 0.4mm nozzle.
Recommendation: Use on high flow applications.
(thick nozzles and thick layers)
Not compatible with DDX. Hotends for DDX are here.
Mosquito Magnum is only available for 1.75 mm filament at this time.
The Latest From Slice Engineering: Mosquito Prime Hotend — Modern Makes
Latest added Features, New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs, New heat sink
Mosquito Magnum Hotend
Mosquito Hotend Front Mount for LGX Lite AfterBurner Upgrade Kit for Voron v2.4, SwitchWire and Trident
The Mosquito Magnum+ Liquid is the High Flow Mosquito hotend for industrial and high flow applications., Mosquito Magnum+ supports up to 2 heater
Mosquito Magnum+ Air-cooled 2.85mm
The Mosquito Magnum Hotend, developed by the visionaries at Slice Engineering, is a radical take on 3D printer hotend form. With its improved separated module keyhole construction and its expanded hot-zone designed for high flow, the Mosquito Magnum Hotend is even hotter (and cooler) than ever! Pair the Mosquito Magnum Hotend with the Bondtech BMG-M Extruder for the ultimate lightweight, minimalist hotend configuration that does not compromise performance or power.
Slice Engineering Mosquito Magnum Hotend
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito hotend to PHase 3., Turn your Creality hotend into an
DDX PH3 Mosquito Magnum Upgrade
The Mosquito Hotend®
The Latest From Slice Engineering: Mosquito Prime Hotend — Modern Makes
This high-performance, conduction-cooled hotend can easily handle high-flow and high-temperature printing. Build and order yours at Slice Engineering.
Mosquito Magnum+® Conduct™ - 1.75 mm
The Mosquito Magnum Hotend, developed by the visionaries at Slice Engineering, is a radical take on 3D printer hotend form. With its improved separated module keyhole construction and its expanded hot-zone designed for high flow, the Mosquito Magnum Hotend is even hotter (and cooler) than ever! Pair the Mosquito Magnum Hotend with the Bondtech BMG-M Extruder for the ultimate lightweight, minimalist hotend configuration that does not compromise performance or power.
Slice Engineering Mosquito Magnum Hotend
