Hiwonder HPS-2018 Full Metal Gear Digital Servo with 20kg High Torque
4.8 (787) · € 9.99 · En Stock
Hiwonder LD-20MG is a full metal gear standard digital servo with 20kg high torque, using aluminium case for Robotic RC Car with control angle 180 degrees.
Specification
Specification
Product weight
0.15Ib / 66g
Product size
1.57*0.8*1.59inch / 40*20*40.5mm
Rotation speed
0.20sec/60°(7.4V)
Stall torque
20 kg·cm (277.6 oz·in) @7.4V
Working Voltage
6-8.4V
Stall current
2.4~3A
No-load Current
100mA
Servo Horn
25T
Servo Wire
30cm(11.8inch) in length
Control Method
PWM pulse width control
PWM pulse width range
500~2500us, corresponding to 0~180°
Duty Ratio
0.5ms~2.5ms
Pulse Period
20ms
Wire Layout
red wire: +; black wire: GND; white wire: PWM/signal
Rotation range
0~180°
Servo accuracy
0.3°
20kg Large Torque
This servo boasts an impressive maximum torque of 20KG.CM 7.4V, enhanced by its accompanying metal servo arm. Delivering robust power, it is housed within an aluminum alloy casing that facilitates excellent heat dissipation, thereby effectively reducing power consumption.
All Metal Gear
This product showcases exceptional performance, minimal noise output, and the inclusion of metal gear and dual-ball bearings. By integrating a high-precision potentiometer, its accuracy and linearity are greatly enhanced leading to an extended service life.
Waterproof Protection
Crafted with high precision and thorough sealing, this servo provides an exceptional level of water resistance. This allows it to operate even in the presence of water splashes.
180° Rotation
The controllable angle range of the steering gear is 180 degrees, with good linearity and accurate control.
It can be rotated 360 degrees when the power is off.
180° Rotation
The controllable angle range of the steering gear is 180 degrees, with good linearity and accurate control.It can be rotated 360 degrees when the power is off.
Specifications
Item
Specification
Product weight
0.15Ib/ 66g
Product size
1.57*0.8*1.59inch/ 40*20*40.5mm
Rotation speed
0.20sec/ 60°(7.4V)
Stall torque
25 kg·cm (277.6 oz·in) @7.4V
Working Voltage
6-8.4V
Stall current
2.4~3A
No-load Current
100mA
Servo Horn
25T
Servo Wire
30cm(11.8inch) in length
Control Method
PWM pulse width control
PWM pulse width range
500~2500us, corresponding to 0~180°
Duty Ratio
0.5ms~2.5ms
Pulse Period
20ms
Wire Layout
red wire: +; black wire: GND; white wire: PWM/signal
Rotation range
0~180°
Servo accuracy
0.3°
Important: 1. Connect GND is necessary. 2. Its recommended that use lithium polymer battery with high rate discharge(min 5C), please dont use dry battery. 3. Please use a short and thick power cord, dont use Dupont cord 4. Not compatible for redcat thunder drift rc car, not compatible for 1/16 scale car.
20kg Digital Servo Full Metal Gear High Torque, Aluminium Case for Robot DIY (Control Angle 180)
Hiwonder 20KG High Torque Digital Servo Motor Full Metal Gear, Waterproof Servp for RC Mode DIY,Control Angle 270° : Toys & Games
Hiwonder LDX-218 Full Metal Gear Digital Servo with Dual Ball Bearing
Miuzei 20KG Servo Motor High Torque RC Servo Metal Gear Waterproof for R/C Model DIY Car Robot, DS3218, Control Angle 270° : Toys & Games
Description: HPS-3518SG is a high-precision waterproof digital servo with 35kg high torque. Using orange oxidized metal shell, it has strong heat dissipation capacity. Featuring excellent linearity and accurate control, the controllable angle range is 180 degrees. The servo uses IP66 waterproof design to resist all kinds of humidity effectively.
35kg Servo Motor High Torque Coreless Metal Gear Waterproof Digital and Stainless Steel Gear Servo Arduino Servo for Robotic DIY, RC Car, Control
Readytosky 20KG Digital Servo High Torque Full Metal Gear Waterproof Servo 180 Degree with 25T Servo Horn for RC Toys Model : Toys & Games
4PCS DS3218MG 20KG Digital Servo High Torque Waterproof Full Metal Gear RC DSServo with 25T Arm for Baja Car RC Crawler (180°） - AliExpress
Hiwonder HPS-2018 Full Metal Gear Digital Servo with 20kg High Torque
Description25kg.cm large torque digital servoMetal servo to extend service lifeOxidized metal shell for improved heat dissipationThe Hiwonder HPS
Hiwonder HPS 2518MG 25KG High Torque Digital Servo w/ Full Metal Gear for Robotic Arm, RC Car & Single Shaft
Hiwonder LD-20MG Full Metal Gear Digital Servo with 20kg High Torque for Robot RC Car – Oz Robotics
Hiwonder 20KG High Torque Digital Servo Motor Full Metal Gear, Waterproof Servp for RC Mode DIY,Control Angle 270° : Toys & Games
Description: HPS-3518SG is a high-precision waterproof digital servo with 35kg high torque. Using orange oxidized metal shell, it has strong heat dissipation capacity. Featuring excellent linearity and accurate control, the controllable angle range is 180 degrees. The servo uses IP66 waterproof design to resist all kinds of humidity effectively.
35kg Servo Motor High Torque Coreless Metal Gear Waterproof Digital and Stainless Steel Gear Servo Arduino Servo for Robotic DIY, RC Car, Control
Hiwonder LDX-218 Full Metal Gear Digital Servo with Dual Ball Bearing
Hiwonder LDX-218 Full Metal Gear Digital Servo with Dual Ball Bearing
Description: HPS-3518SG is a high-precision waterproof digital servo with 35kg high torque. Using orange oxidized metal shell, it has strong heat dissipation capacity. Featuring excellent linearity and accurate control, the controllable angle range is 180 degrees. The servo uses IP66 waterproof design to resist all kinds of humidity effectively.
35kg Servo Motor High Torque Coreless Metal Gear Waterproof Digital and Stainless Steel Gear Servo Arduino Servo for Robotic DIY, RC Car, Control
